AFDKO outline checks per UFO master (report-only: overlaps, coincident points, colinear segments, flat curves, tiny subpaths) · ← all reports
“There is an overlap” findings are expected: Buena Mono uses overlap-based glyph construction; overlaps are removed by fontmake at build time. The actionable findings are the other categories.
| Finding | Glyphs | Examples |
|---|
| There is an overlap | 1255 | — by-design (overlap construction; flattened at build) |
| Colinear line at | 318 | uni0122, uni013B, uni013D, uni0145, uni0156, uni0182, uni0184, uni0185, uni018D, uni0198, uni0198.smcp, uni0199… |
| Colinear line at; There is an overlap | 294 | — by-design (overlap construction; flattened at build) |
| Coincident points at | 91 | uni0186, uni0186.smcp, uni037E, uni038C, uni038C.smcp, uni0398, uni0398.smcp, uni039F, uni039F.smcp, uni03A6, uni03A6.smcp, uni03AC… |
| Coincident points at; There is an overlap | 30 | — by-design (overlap construction; flattened at build) |
| has no contours | 27 | uni034F, uni200C, uni200D, uni200E, uni200F, uni2028, uni2029, uni202A, uni202B, uni202C, uni202D, uni202E… |
| Flat curve at | 14 | germandbls, germandbls.smcp, uni014B, uni246A, uni2471, uni2474, uni247E, uni2480, uni2483, uni2485, uni2495, uni2498… |
| Colinear line at; Contour 1 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 10 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Flat curve at | 6 | one.onum, uni2152, uni215F, uni246F, uni24F5, uni24FE |
| Colinear line at; Contour 3 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 4 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Flat curve at | 2 | uni03AD, uni03B5 |
| Colinear line at; Contour 2 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 2 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 4 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 2 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Colinear line at; There is an overlap | 2 | — by-design (overlap construction; flattened at build) |
| Flat curve at; There is an overlap | 2 | — by-design (overlap construction; flattened at build) |
| Contour 1 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 5 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 2 is too small: bounding box is less than minimum area; Contour 3 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Contour 2 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Flat curve at; There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| (most recent call last): | 1 | Traceback |
| ', 'qcurve'); ('Trying to perform operation on unsupported segment type | 1 | booleanOperations.exceptions.UnsupportedContourError: |
| Finding | Glyphs | Examples |
|---|
| There is an overlap | 981 | — by-design (overlap construction; flattened at build) |
| Colinear line at | 455 | uni0182, uni0184, uni0185, uni018D, uni0195, uni0198, uni0198.smcp, uni0199, uni01A3, uni01A4, uni01A4.smcp, uni01A5… |
| Colinear line at; There is an overlap | 170 | — by-design (overlap construction; flattened at build) |
| Coincident points at | 83 | r.ss12, uni0186, uni0186.smcp, uni0190, uni0190.smcp, uni0196, uni0196.smcp, uni037E, uni038C, uni038C.smcp, uni0398, uni0398.smcp… |
| has no contours | 27 | uni034F, uni200C, uni200D, uni200E, uni200F, uni2028, uni2029, uni202A, uni202B, uni202C, uni202D, uni202E… |
| Coincident points at; There is an overlap | 24 | — by-design (overlap construction; flattened at build) |
| Flat curve at | 17 | uni0363, uni2189, uni2471, uni2473, uni2474, uni247D, uni247E, uni2480, uni2482, uni2485, uni2487, uni2488… |
| Colinear line at; Flat curve at | 6 | one.onum, uni246F, uni2472, uni2497, uni24F5, uni24FE |
| Flat curve at; There is an overlap | 6 | — by-design (overlap construction; flattened at build) |
| Contour 1 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 5 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Flat curve at | 2 | uni03AD, uni03B5 |
| Colinear line at; Flat curve at; There is an overlap | 2 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Colinear line at | 1 | uni03F9 |
| Contour 2 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| (most recent call last): | 1 | Traceback |
| ', 'qcurve'); ('Trying to perform operation on unsupported segment type | 1 | booleanOperations.exceptions.UnsupportedContourError: |
| Finding | Glyphs | Examples |
|---|
| There is an overlap | 1316 | — by-design (overlap construction; flattened at build) |
| Colinear line at; There is an overlap | 345 | — by-design (overlap construction; flattened at build) |
| Colinear line at | 253 | uni0182, uni0184, uni018D, uni01A3, uni01A6, uni01A6.smcp, uni01A7, uni01A8, uni01AA, uni01AC, uni01AC.smcp, uni01AD… |
| Coincident points at | 102 | uni0186, uni0186.smcp, uni0194, uni0194.smcp, uni0196, uni0196.smcp, uni01B7, uni01B7.smcp, uni01DD, uni037E, uni0384, uni0385… |
| has no contours | 27 | uni034F, uni200C, uni200D, uni200E, uni200F, uni2028, uni2029, uni202A, uni202B, uni202C, uni202D, uni202E… |
| Coincident points at; There is an overlap | 26 | — by-design (overlap construction; flattened at build) |
| Flat curve at; There is an overlap | 20 | — by-design (overlap construction; flattened at build) |
| Contour 2 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 13 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 1 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 9 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 2 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 9 | — by-design (overlap construction; flattened at build) |
| Contour 1 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 8 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Colinear line at; There is an overlap | 6 | — by-design (overlap construction; flattened at build) |
| Contour 3 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 5 | — by-design (overlap construction; flattened at build) |
| Flat curve at | 5 | uni03B2, uni03C6, uni246F, uni2473, uni24F6 |
| Colinear line at; Flat curve at | 4 | one.onum, uni246C, uni2472, uni24F5 |
| Colinear line at; Flat curve at; There is an overlap | 3 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Flat curve at | 2 | uni03AD, uni03B5 |
| Colinear line at; Contour 3 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 2 | — by-design (overlap construction; flattened at build) |
| Contour 0 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 2 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Colinear line at | 1 | uni03EA |
| Contour 4 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 4 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Contour 4 is too small: bounding box is less than minimum area; Flat curve at; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Colinear line at; Flat curve at | 1 | uni2471 |
| Contour 2 is too small: bounding box is less than minimum area; Flat curve at; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Contour 1 is too small: bounding box is less than minimum area; Flat curve at; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 5 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| (most recent call last): | 1 | Traceback |
| ', 'qcurve'); ('Trying to perform operation on unsupported segment type | 1 | booleanOperations.exceptions.UnsupportedContourError: |
| Finding | Glyphs | Examples |
|---|
| There is an overlap | 1514 | — by-design (overlap construction; flattened at build) |
| Colinear line at; There is an overlap | 387 | — by-design (overlap construction; flattened at build) |
| Colinear line at | 193 | uni0182, uni0184, uni018D, uni01A3, uni01A6, uni01A6.smcp, uni01A7, uni01A8, uni01AD, uni01B8, uni01B8.smcp, uni01B9… |
| Coincident points at | 99 | d, p, uni0186, uni0186.smcp, uni0196, uni0196.smcp, uni01B1.smcp, uni01B7, uni01B7.smcp, uni037E, uni0384, uni0385… |
| Coincident points at; There is an overlap | 43 | — by-design (overlap construction; flattened at build) |
| has no contours | 27 | uni034F, uni200C, uni200D, uni200E, uni200F, uni2028, uni2029, uni202A, uni202B, uni202C, uni202D, uni202E… |
| Coincident points at; Colinear line at; There is an overlap | 25 | — by-design (overlap construction; flattened at build) |
| Flat curve at; There is an overlap | 19 | — by-design (overlap construction; flattened at build) |
| Contour 2 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 16 | — by-design (overlap construction; flattened at build) |
| Contour 1 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 7 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 1 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 7 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Flat curve at; There is an overlap | 6 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Colinear line at | 4 | uni03EA, uni0521, uni0528, uni1DC3 |
| Colinear line at; Contour 3 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 4 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 2 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 3 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Contour 6 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 2 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Flat curve at | 1 | one.onum |
| Contour 3 is too small: bounding box is less than minimum area; Start point: () | 1 | onequarter |
| Contour 4 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Contour 5 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Contour 1 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Contour 1 is too small: bounding box is less than minimum area; Flat curve at; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 2 is too small: bounding box is less than minimum area; Contour 3 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Colinear line at; Contour 2 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Flat curve at; There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Colinear line at; Flat curve at; There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Contour 5 is too small: bounding box is less than minimum area; Start point: () | 1 | uni24F8 |
| Coincident points at; Flat curve at | 1 | uni263A |
| (most recent call last): | 1 | Traceback |
| ', 'qcurve'); ('Trying to perform operation on unsupported segment type | 1 | booleanOperations.exceptions.UnsupportedContourError: |
| Finding | Glyphs | Examples |
|---|
| There is an overlap | 1284 | — by-design (overlap construction; flattened at build) |
| Colinear line at | 285 | uni0182, uni0184, uni0185, uni018D, uni0198, uni0198.smcp, uni0199, uni01A3, uni01A4, uni01A4.smcp, uni01A6, uni01A6.smcp… |
| Colinear line at; There is an overlap | 282 | — by-design (overlap construction; flattened at build) |
| Coincident points at | 91 | uni0186, uni0186.smcp, uni037E, uni038C, uni038C.smcp, uni0398, uni0398.smcp, uni039F, uni039F.smcp, uni03A6, uni03A6.smcp, uni03AC… |
| Coincident points at; There is an overlap | 30 | — by-design (overlap construction; flattened at build) |
| has no contours | 27 | uni034F, uni200C, uni200D, uni200E, uni200F, uni2028, uni2029, uni202A, uni202B, uni202C, uni202D, uni202E… |
| Colinear line at; Contour 1 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 10 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Flat curve at | 6 | one.onum, uni2152, uni215F, uni246F, uni24F5, uni24FE |
| Colinear line at; Contour 3 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 4 | — by-design (overlap construction; flattened at build) |
| Flat curve at | 3 | germandbls, germandbls.smcp, uni014B |
| Coincident points at; Flat curve at | 2 | uni03AD, uni03B5 |
| Contour 1 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 2 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 2 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 2 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Colinear line at; There is an overlap | 2 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 5 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 4 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Flat curve at; There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| (most recent call last): | 1 | Traceback |
| ', 'qcurve'); ('Trying to perform operation on unsupported segment type | 1 | booleanOperations.exceptions.UnsupportedContourError: |
| Finding | Glyphs | Examples |
|---|
| There is an overlap | 995 | — by-design (overlap construction; flattened at build) |
| Colinear line at | 423 | uni0182, uni0184, uni0185, uni018D, uni0195, uni0198, uni0198.smcp, uni0199, uni01A3, uni01A4, uni01A4.smcp, uni01A5… |
| Colinear line at; There is an overlap | 166 | — by-design (overlap construction; flattened at build) |
| Coincident points at | 82 | uni0186, uni0186.smcp, uni0190, uni0190.smcp, uni0196, uni0196.smcp, uni037E, uni038C, uni038C.smcp, uni0398, uni0398.smcp, uni039F… |
| has no contours | 27 | uni034F, uni200C, uni200D, uni200E, uni200F, uni2028, uni2029, uni202A, uni202B, uni202C, uni202D, uni202E… |
| Coincident points at; There is an overlap | 24 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Flat curve at | 6 | one.onum, uni246F, uni2472, uni2497, uni24F5, uni24FE |
| Contour 1 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 5 | — by-design (overlap construction; flattened at build) |
| Flat curve at | 2 | bar_hyphen_greater.liga, uni0363 |
| Coincident points at; Flat curve at | 2 | uni03AD, uni03B5 |
| Colinear line at; Flat curve at; There is an overlap | 2 | — by-design (overlap construction; flattened at build) |
| Flat curve at; There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Colinear line at | 1 | uni03F9 |
| Contour 2 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| (most recent call last): | 1 | Traceback |
| ', 'qcurve'); ('Trying to perform operation on unsupported segment type | 1 | booleanOperations.exceptions.UnsupportedContourError: |
| Finding | Glyphs | Examples |
|---|
| There is an overlap | 1354 | — by-design (overlap construction; flattened at build) |
| Colinear line at; There is an overlap | 319 | — by-design (overlap construction; flattened at build) |
| Colinear line at | 233 | uni0182, uni0184, uni018D, uni01A3, uni01A6, uni01A6.smcp, uni01A7, uni01A8, uni01AA, uni01AC, uni01AC.smcp, uni01AD… |
| Coincident points at | 102 | uni0186, uni0186.smcp, uni0194, uni0194.smcp, uni0196, uni0196.smcp, uni01B7, uni01B7.smcp, uni01DD, uni037E, uni0384, uni0385… |
| has no contours | 27 | uni034F, uni200C, uni200D, uni200E, uni200F, uni2028, uni2029, uni202A, uni202B, uni202C, uni202D, uni202E… |
| Coincident points at; There is an overlap | 26 | — by-design (overlap construction; flattened at build) |
| Contour 2 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 12 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 1 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 11 | — by-design (overlap construction; flattened at build) |
| Contour 1 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 8 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 2 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 8 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Colinear line at; There is an overlap | 7 | — by-design (overlap construction; flattened at build) |
| Contour 3 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 6 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Flat curve at | 5 | one.onum, uni246C, uni2472, uni24F5, uni24FE |
| Flat curve at; There is an overlap | 4 | — by-design (overlap construction; flattened at build) |
| Flat curve at | 3 | asciitilde, uni03B2, uni03C6 |
| Colinear line at; Contour 3 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 3 | — by-design (overlap construction; flattened at build) |
| Contour 5 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 2 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Flat curve at | 2 | uni03AD, uni03B5 |
| Contour 4 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 2 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Flat curve at; There is an overlap | 2 | — by-design (overlap construction; flattened at build) |
| Contour 3 is too small: bounding box is less than minimum area; Flat curve at; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 4 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Colinear line at; Flat curve at | 1 | uni2471 |
| Colinear line at; Contour 5 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 6 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| (most recent call last): | 1 | Traceback |
| ', 'qcurve'); ('Trying to perform operation on unsupported segment type | 1 | booleanOperations.exceptions.UnsupportedContourError: |
| Finding | Glyphs | Examples |
|---|
| There is an overlap | 1588 | — by-design (overlap construction; flattened at build) |
| Colinear line at; There is an overlap | 366 | — by-design (overlap construction; flattened at build) |
| Colinear line at | 169 | uni0182, uni0184, uni018D, uni01A3, uni01A6, uni01A6.smcp, uni01A7, uni01A8, uni01AD, uni01B8, uni01B8.smcp, uni01B9… |
| Coincident points at | 90 | uni0186, uni0186.smcp, uni0196, uni0196.smcp, uni01B7, uni01B7.smcp, uni02BE, uni037E, uni0384, uni0385, uni0386, uni0386.smcp… |
| Coincident points at; There is an overlap | 40 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Colinear line at; There is an overlap | 28 | — by-design (overlap construction; flattened at build) |
| has no contours | 27 | uni034F, uni200C, uni200D, uni200E, uni200F, uni2028, uni2029, uni202A, uni202B, uni202C, uni202D, uni202E… |
| Coincident points at; Colinear line at | 9 | uni01BA, uni01F4, uni01F6, uni02F3, uni050A, uni1D5F, uni1D61, uni1D6A, uni1D6B |
| Contour 2 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 7 | — by-design (overlap construction; flattened at build) |
| Contour 1 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 5 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 1 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 5 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Flat curve at; There is an overlap | 5 | — by-design (overlap construction; flattened at build) |
| Contour 4 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 4 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 3 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 3 | — by-design (overlap construction; flattened at build) |
| Contour 3 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 3 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 2 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 2 | — by-design (overlap construction; flattened at build) |
| Flat curve at | 1 | asciitilde |
| Colinear line at; Flat curve at | 1 | one.onum |
| Contour 3 is too small: bounding box is less than minimum area; Start point: () | 1 | onequarter |
| Flat curve at; There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Contour 1 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Contour 1 is too small: bounding box is less than minimum area; Flat curve at; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Colinear line at; Contour 1 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 2 is too small: bounding box is less than minimum area; Contour 3 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Flat curve at; There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Colinear line at; Contour 2 is too small: bounding box is less than minimum area; Flat curve at; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Colinear line at; Flat curve at; There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Contour 7 is too small: bounding box is less than minimum area; Start point: (); There is an overlap | 1 | — by-design (overlap construction; flattened at build) |
| Coincident points at; Flat curve at | 1 | uni263A |
| (most recent call last): | 1 | Traceback |
| ', 'qcurve'); ('Trying to perform operation on unsupported segment type | 1 | booleanOperations.exceptions.UnsupportedContourError: |